原文传递
Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. I: Methodological Framework and Design of Base Rocking Joint
| 题名： | Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. I: Methodological Framework and Design of Base Rocking Joint |
| 其他题名： | ASCE.(2010)."Minimum design loads for buildings and other structures."7-10,Reston,VA. |
| 正文语种： | 英文 |
| 作者： | Lydell Wiebe |
| 关键词： | Performance-based seismic design;Self-centering systems;Controlled rocking steel braced frames;Seismic effects |
| 摘要： | Controlled rocking steel braced frames (CRSBFs) are being developed as a seismic force resisting system that can be constructed economically to avoid structural damage and residual deformations following an earthquake. In a CRSBF, selected columns are permitted to uplift from the foundation in response to severe seismic loading, and posttensioning and energy dissipation are selected to control the magnitude of the rocking response. Despite extensive experimental testing to demonstrate that this behavior is stable and repeatable, there has been a lack of comprehensive guidance for potential designers of CRSBFs. This paper proposes a performance-based design methodology for CRSBFs, which consists of defining the performance objectives, designing the base rocking joint based on a single-degree-of-freedom (SDOF) model, and capacity protecting the rest of the structure for the maximum forces expected during the rocking response. This paper focuses on the design of the base rocking joint, while Part II proposes a method for capacity designing the rest of the structure with due consideration of higher-mode effects. This paper shows how to design the base rocking joint to achieve a targeted response based on the results of 30,492 analyses of SDOF systems with flag-shaped hystereses. The SDOF results suggest that the rotation demands on the rocking joint depend on the initial stiffness of the system. For structures with initial periods less than about 0.4 s, the base rocking joint requires smaller force reduction factors than are codified for ductile seismic force-resisting systems, but much larger force reduction factors could be used for structures with longer initial periods, provided that the frame members are capacity designed and that there is sufficient deformation capacity in the posttensioning and energy dissipation elements. These conclusions are validated by considering the peak and residual displacement response of three example structures at two seismic hazard levels. |
| 出版年： | 2015 |
| 论文唯一标识： | P-26Y2015V141N09019 |
| 英文栏目名称： | Technical Papers |
| doi： | 10.1061/(ASCE)ST.1943-541X.0001202 |
| 期刊名称： | Journal of Structural Engineering |
| 拼音刊名(出版物代码)： | P-26 |
| 卷： | 141 |
| 期： | 09 |
| 页码： | 209-219 |
相关文献
- Erratum for "Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. I: Methodological Framework and Design of Base Rocking Joint" by Lydell Wiebe and Constantin Christopoulos
- Erratum for "Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. II: Design of Capacity-Protected Elements" by Lydell Wiebe and Constantin Christopoulos
- Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. II: Design of Capacity-Protected Elements
- Rocking Spine for Enhanced Seismic Performance of Reinforced Concrete Frames with Infills
- Multihazard Performance-Based Assessment Framework for Multistory Steel Buildings
- Capacity Design Procedure for Rocking Braced Frames Using Modified Modal Superposition Method
检索历史
应用推荐
