原文传递
Lateral Performance of Traditional Heavy Timber Frames with Mortise-Tenon Joints Retrofitted Using Self-Tapping Screws
| 题名： | Lateral Performance of Traditional Heavy Timber Frames with Mortise-Tenon Joints Retrofitted Using Self-Tapping Screws |
| 其他题名： | ASTM.2005.Standard test method for cyclic(reversed)load test for shear resistance of walls for buildings.Annual book of ASTM standards. |
| 正文语种： | 英文 |
| 作者： | Xiaobin Song |
| 关键词： | Lateral performances;Mortise-tenon joint;Beam-column frames;Self-tapping screws;Retrofitting |
| 摘要： | This paper presents the test results of three 1=2-scaled Chinese traditional mortise-tenon jointed beam-column frames, initially loaded to damage and retrofitted by use of self-tapping screws and retested under a constant vertical load and cyclic lateral loading. The retrofitting effect on a bare frame and two otherwise the same frames with partial (with a window opening) and full infill is discussed in terms of the damage distribution, envelope curve properties, strength degradation, and equivalent viscous damping ratio. The results indicate that the retrofitted frames exhibited smaller stiffness (27％ the least), large deformability (155％ the most), higher damping ratios (118％ the most), and similar strength degradation (less than 40％ decrease) from primary cycles to trailing cycles. The maximum loads of the rested bare frames, partially infilled frame, and fully infilled frame reached 55％, 85％, and 125％ of those from the initial testing, respectively. It is also believed that the retrofitting of the fork-leg joints of the columns to the bottom beams was unsuccessful using screws and may be unnecessary for the better function of the infill panels. The retrofitting of the mortise-tenon joints next to the main and secondary beams above the infill panels are, however, very important, especially in terms of preventing pulling-out deformation of the joints because it is closely related to the shear stiffness of the infill panels. |
| 出版年： | 2018 |
| 论文唯一标识： | P-26Y2018V144N10026 |
| 英文栏目名称： | ANNIVERSARY PAPERS |
| doi： | 10.1061/(ASCE)ST.1943-541X.0002191 |
| 期刊名称： | Journal of Structural Engineering |
| 拼音刊名(出版物代码)： | P-26 |
| 卷： | 144 |
| 期： | 10 |
| 页码： | 334-343 |
相关文献
- Modeling Hysteretic Behavior of Lateral Load-Resisting Elements in Traditional Chinese Timber Structures
- Seismic Behavior of Predamaged Mortise-and-Tenon Joints Reinforced Using Viscoelastic Dampers
- Calibration of Resistance Factor for Self-Tapping Screws in Canada
- Lateral Behavior of Traditional Chinese Timber-Frames Strengthened with Shape-Memory Alloy: Experiments and Analytical Model
- Experimental Study of the Seismic Performance of Concrete Beam-Column Frame Joints with DfD Connections
- Load-Carrying Capacity of Lengthwise Cracked Wood Beams Retrofitted by Self-Tapping Screws
检索历史
应用推荐
