原文传递
Vortex-Induced Vibration Performance and Suppression Mechanism for a Long Suspension Bridge with Wide Twin-Box Girder
| 题名： | Vortex-Induced Vibration Performance and Suppression Mechanism for a Long Suspension Bridge with Wide Twin-Box Girder |
| 其他题名： | Arco,D.C.D.,and A.C.Aparicio.1999."Improving suspension bridge wind stability with aerodynamic appendages."J.Struct.Eng.125(12):1367-1375.https://doi.org/10.1061/(ASCE)0733-9445(1999)125:12(1367). |
| 正文语种： | 英文 |
| 作者： | C. M. Ma |
| 关键词： | Wind tunnel test;Particle image velocimetry (PIV);Vortex-induced vibration (VIV);Twin-box girder;Suspension bridge;Suppression countermeasure |
| 摘要： | This study investigates the vortex-induced vibration (VIV) behavior of a twin-box girder bridge by means of aerodynamic sectional wind tunnel test and particle image velocimetry (PIV) measurements. The effect of grid plates on suppressing the VIV of twin-box girder model is examined and the influence of four design parameters of grid plates [porosity, flat plate width (FPW) ratio, composition type, and installation position] is studied. The primary causes of VIV and the suppression mechanism of grid plates are discussed in detail. It is found that torsional VIV is more vulnerable to the change in wind attack angle than is vertical VIV. The installation of grid plates noticeably suppresses the VIVof test model and its effect depends on the variation of different design parameters. For the porosity and FPW ratio, there is an optimal range in which the improvement of VIV suppression is more significant; the optimal value of porosity is about 42％-67％, and the optimal value of FPW ratio is about 0.042-0.167. Moreover, the uniform distribution of grid plates is more preferable in terms of suppressing VIV than is nonuniform distribution, whereas the installation of grid plates on the upper side leads to better performance of VIV suppression than does installation on the lower side. The primary cause of VIV of the twin-box girder is closely related to the formation of large-scale vortex shedding at the tail of the upstream box girder. The generation of large-scale vortex can be eliminated by appropriate selection of the design parameters of grid plates. |
| 出版年： | 2018 |
| 论文唯一标识： | P-26Y2018V144N11005 |
| 英文栏目名称： | TECHNICAL PAPERS |
| doi： | 10.1061/(ASCE)ST.1943-541X.0002198 |
| 期刊名称： | Journal of Structural Engineering |
| 拼音刊名(出版物代码)： | P-26 |
| 卷： | 144 |
| 期： | 11 |
| 页码： | 37-50 |
相关文献
- Prediction and Suppression of Vortex-Induced Vibration for Steel Tubes with Bolted Joints in Tubular Transmission Towers
- Nonlinear Wind Tunnel Tests of Cable-Supported Bridges
- Three-Dimensional Numerical Simulations of Vortex-Induced Vibrations of a Circular Cylinder in Oscillatory Flow
- CONSTRUCTION OF 1000 MTR LONG PSC BOX GIRDER BRIDGE USING PRECAST SEGMENTAL CONSTRUCTION TECHNIQUE ACROSS UJH RIVER IN THE STATE OF JAMMU & KASHMIR THE LONGEST BRIDGE IN BRO -A CASE STUDY
- Hydrodynamic Forces and Coefficients on Flexible Risers Undergoing Vortex-Induced Vibrations in Uniform Flow
- Aerodynamic and Aerostatic Performance of a Long-Span Bridge with Wide Single Box Girder Installed with Vertical and Horizontal Stabilizers
检索历史
应用推荐
