原文传递
Experimental Evaluation and Numerical Modeling of Wide-Flange Steel Columns Subjected to Constant and Variable Axial Load Coupled with Lateral Drift Demands
| 题名： | Experimental Evaluation and Numerical Modeling of Wide-Flange Steel Columns Subjected to Constant and Variable Axial Load Coupled with Lateral Drift Demands |
| 正文语种： | 英文 |
| 作者： | Julien Cravero; Ahmed Elkady, Ph.D.; Dimitrios G. Lignos, Ph.D., M.ASCE |
| 作者单位： | Univ, of Southampton |
| 关键词： | Steel columns; Large-scale testing; Axial shortening; Axial load-carrying capacity; Column repairability curve; Nonlinear modeling of steel columns; Applied Technology Council (ATC) 72; Continuum finite-element models; Scale effects |
| 摘要： | This paper presents results from an experimental evaluation on the pre- and post-buckling behavior of 12 steel wide-flange cantilever columns under axial load and lateral drift demands. The influence of several loading and geometric parameters, including the cross-sectional local web and flange slenderness ratios, applied axial load, and lateral and axial loading history on the performance of these columns is thoroughly examined. The test data indicate that cross-sectional local buckling is highly asymmetric in steel columns under variable axial load. A relatively high compressive axial load can significantly compromise the steel column seismic stability and ductility, but this also depends on the imposed lateral loading history. The AISC axial load-bending moment interaction equation provides accurate estimates of a steel column's yield resistance. However, the same equation underestimates by at least 30% the column's peak resistance, regardless of the loading scenario. Measurements of column flange deformation, axial shortening, flexural resistance, and lateral drift are combined in a single graphical format aiding the process of assessing steel column repairability after earthquakes. The test data suggest that current practice-oriented nonlinear component modeling guidelines may not provide sufficient accuracy in establishing both the monotonic and first-cycle envelope curves of steel columns. It is also shown that high-fidelity continuum finite-element models should consider geometric imperfections of proper magnitude, in addition to the steel material inelasticity, to properly simulate the inelastic buckling of wide-flange steel columns and generalize the findings of physical tests. Issues arising due to similitude are also discussed to properly limit steel column instability modes in future studies. |
| 出版日期： | 2020 |
| 出版年： | 2020 |
| 期刊名称： | Journal of Structural Engineering |
| 卷： | Vol.146 |
| 期： | No.03 |
| 页码： | 04019222 |
相关文献
- Discussion of 'Experimental Evaluation and Numerical Modeling of Wide-Flange Steel Columns Subjected to Constant and Variable Axial Load Coupled with Lateral Drift Demands' by Julien Cravero, Ahmed Elkady, and Dimitrios G. Lignos
- Proposed Updates to the ASCE 41 Nonlinear Modeling Parameters for Wide-Flange Steel Columns in Support of Performance-Based Seismic Engineering
- Improved Seismic Design and Nonlinear Modeling Recommendations for Wide-Flange Steel Columns
- Development of Enhanced Seismic Compactness Requirements for Webs in Wide-Flange Steel Columns
- Collapse Response and Design of Deep Steel Columns Subjected to Lateral Displacement
- Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols
检索历史
应用推荐
