原文传递
Computational Model for the Flexural Capacity and Stiffness of Eccentric RHS X-Connections under Brace Out-of-Plane Bending Moment
| 题名： | Computational Model for the Flexural Capacity and Stiffness of Eccentric RHS X-Connections under Brace Out-of-Plane Bending Moment |
| 正文语种： | 英文 |
| 作者： | Bida Zhao, Ph.D.; Ke Ke, Ph.D.; Chengqing Liu, Ph.D.;Li Hong, Ph.D. |
| 作者单位： | Zhejiang Univ;Southwest Jiaotong Univ;Hunan Univ;Hefei Univ |
| 关键词： | Computational model; Eccentric rectangular hollow section (ERHS) X-connections; Out-of-plane flexural capacity; Initial stiffness; Yield line model; Frame-beam model |
| 摘要： | This paper aims to establish a precise and concise formula for quantifying the out-of-plane flexural capacity and initial stiffness of unstiffened eccentric steel rectangular hollow section (RHS) X-connections. In this paper, an experimental study is first conducted and corresponding numerical simulation is subsequently carried out. Based on the failure mode and deformed pattern observed in the experimental and numerical studies, two yield line models and a frame-beam model are developed to predict the out-of-plane flexural capacity and flexural initial stiffness of the X-connections. Then, parametric analyses are conducted to verify the rationality of the form of capacity theoretical formula, and to derive an initial stiffness theoretical formula that is significantly simplified. Finally, the predicted out-of-plane flexural capacity and initial stiffness of the X-connections are respectively compared with those of the corresponding experimental and numerical results using the simplified formula. This comparison confirmed the validity of the proposed formula. |
| 出版日期： | 2020 |
| 出版年： | 2020 |
| 期刊名称： | Journal of Structural Engineering |
| 卷： | Vol.146 |
| 期： | No.03 |
| 页码： | 04019227 |
相关文献
- Demands on Reduced Beam Section Connections with Out-of-Plane Skew
- Masonry Walls under Combined In-Plane and Out-of-Plane Loadings
- Experimental Testing of a Replaceable Brace Module for Seismically Designed Concentrically Braced Steel Frames
- Discussion of "Component-Based Model for Single-Plate Shear Connections with Pretension and Pinched Hysteresis" by Jonathan M. Weigand
- Laterally Offset RHS X-Connections
- High-Strength Concrete Masonry Walls under Concentric and Eccentric Loadings
检索历史
应用推荐
