原文传递
Stiffness and Cracking Behavior of New U-Shaped Steel and Concrete Composite Beam under Negative Bending
| 题名： | Stiffness and Cracking Behavior of New U-Shaped Steel and Concrete Composite Beam under Negative Bending |
| 正文语种： | 英文 |
| 作者： | Yi Zhao; Xuhong Zhou; Yuanlong Yang; Yohchia Frank Chen, M.ASCE;Saravanan Gurupackiam |
| 作者单位： | Chongqing Univ |
| 关键词： | Composite beam; U-shaped steel; Negative bending; Stiffness; Cracking load; Shear connection degree |
| 摘要： | This paper discussed the stiffness and cracking behavior of a new kind of reinforcement-stiffened cold-formed U-shaped steel and concrete composite beam (RCUCB) under negative bending. The static behavior of the RCUCB was discussed based on a negative bending experiment of 10 specimens. The reinforcement system consisting of the inverted U-shaped reinforcement, reinforcement truss, and bottom reinforcement was shown to maintain the integral action of the RCUCB, especially after the yield load. The RCUCB was found to behave well in deformability, ductility, and plastic rotation ability under negative bending: (1) the failure deflection and ductility factor reached Lo/33 (where Lo is the effective span) and 17.7 respectively; (2) the ductility factor increased with decreasing steel ratio and decreasing reinforcement ratio; and (3) approximately 84.7%-94.0% of the web height yielded at the peak load, resulting in a plastification coefficient of 1.3-1.9. The damage process was defined with the cracking, yielding, and buckling loads approximately equal to 0.16PM, 0.61 P，and 0.90 respectively. During the experiment, the degree of shear connection in the negative bending area showed little effect on the negative bending behavior before yield load. Calculation methods for initial stiffness, second stiffness, and cracking moment were proposed, and the calculation results agreed well with the test results. |
| 出版日期： | 2020 |
| 出版年： | 2020 |
| 期刊名称： | Journal of Structural Engineering |
| 卷： | Vol.146 |
| 期： | No.05 |
| 页码： | 04020046 |
相关文献
- Flexural Capacity of Bolted U-Shaped Steel-Concrete Composite Beams under Monotonic and Cyclic Loading
- Experimental Investigation on Flexural Behavior of U-Shaped Steel–Concrete Composite Beams with Bolt Connections under a Negative Bending Moment
- Bending Capacity and Elastic Stiffness for a Novel Configuration of Cold-Formed U-Shaped Steel-and-Concrete Composite Beams
- Fire-Resistant Design Methods of U-Shaped Steel-Concrete Composite Beams under Distributed Loading
- Computing Creep Secondary Internal Forces in Continuous Steel-Concrete Composite Beam Constructed through Segmented Pouring
- Steel–Timber Composite Beam-to-Column Connections with Shear Tab
检索历史
应用推荐
