当前位置: 首页> 国外交通期刊数据库 >详情
原文传递 Strength and Deformation Capacity of Tension and Flexural RC Members Containing Steel Fibers
题名: Strength and Deformation Capacity of Tension and Flexural RC Members Containing Steel Fibers
正文语种: 英文
作者: Tomislav Markic; Ali Amin, Ph.D.; Walter Kaufmann, Ph.D.; Thomas Pfyl, Ph.D
作者单位: Institute of Structural Engineering, ETH Zurich;Univ, of Sydney
关键词: Steel fiber; Concrete; Deformation capacity; Ductility; Crack localization; Moment-curvature relationship; Tension chord model
摘要: A misnomer exists within the literature on the topic of ductility (deformation capacity) in steel fiber reinforced concrete (SFRC) members subjected to flexure. Several studies report that the addition of fibers to reinforced concrete (RC) beams subjected to flexure increases the deformation capacity of the members. This can be true for normally longitudinally reinforced concrete beams; however, a few studies have shown this not to be the case, particularly for lightly reinforced concrete members containing even low amounts of steel fibers. It has been observed that failure may occur at far lower deformations in structural concrete members containing steel fibers than without the fibers. This paper presents a system of rational and mechanically consistent expressions capable of predicting the entire load-deformation relationship for SFRC tension and one-way flexural members. The model is also capable of determining whether the addition of fibers to the RC member may lead to a failure mode governed by rupture of the longitudinal reinforcing bars or crushing of the concrete.
出版日期: 2020
出版年: 2020
期刊名称: Journal of Structural Engineering
卷: Vol.146
期: No.05
页码: 04020069
检索历史
应用推荐