原文传递
Simplified Analytical Model for Interfacial Bond Strength of Deformed Steel Rebars Embedded in Pre-cracked Concrete
| 题名： | Simplified Analytical Model for Interfacial Bond Strength of Deformed Steel Rebars Embedded in Pre-cracked Concrete |
| 正文语种： | 英文 |
| 作者： | Seyed Sina Mousavi; Lotfi Guizani, Ph.D., P.Eng.;Claudiane M. Ouellet-Plamondon, Ph.D., P.Eng., A.M.ASCE |
| 作者单位： | Univ, of Quebec |
| 关键词： | Bond mechanism model; Pre-cracked concrete; Rib geometry; Bearing angle |
| 摘要： | Although extensive bond models have been developed for use in the numerical simulation of uncracked reinforced concrete, no simplified method exists providing satisfactory accuracy and efficiency for pre-cracked concrete. This paper intends, therefore, to explain bond failure mechanisms in pre-cracked concrete一as compared to in tact concrete一using a simplified theoretical model. The main bond failure mechanisms considered in this study involve: (1) crushing a wedge-shaped concrete block using reinforcing bar ribs, and (2) tearing off the concrete between two adjacent ribs. Based on these scenarios, analytical expressions are derived to predict the average bond strength for uncracked concrete, in which the bearing angle, the rib face angle, the rib height, the rib spacing, and the friction coefficient between surfaces are the key parameters. A modified version of this model is proposed to predict the maximum bond strength of rebars embedded in pre-cracked concrete by introducing a reduction factor of surrounding confinement caused by the pre-cracking phenomenon. An experimental program was also conducted to validate the proposed models. Experimental results emphasize the crucial impact of the pre-cracking phe-nomcnon on both the bond strength and the failure pattern. Analysis results show that the bearing angle and surrounding confinement by concrete cover are crucial parameters controlling bond failure of rebars in pre-cracked concrete. The results also indicate that as the crack width corresponding to the low confinement increases, rib sliding is expected to occur as an illustration of weak interfacial strength. The proposed bond mechanism models are also in good agreement with the experimental observations. |
| 出版日期： | 2020 |
| 出版年： | 2020 |
| 期刊名称： | Journal of Structural Engineering |
| 卷： | Vol.146 |
| 期： | No.08 |
| 页码： | 04020142 |
相关文献
- Analytical Approach to Modeling the Effect of Transverse Reinforcements on the Bond Strength of Deformed Bars
- Postyield Bond Deterioration and Damage Assessment of RC Beams Using Distributed Fiber-Optic Strain Sensing System
- Effect of Loading Rate on Bond Behavior of Deformed Reinforcing Bars in Concrete under Biaxial Lateral Pressures
- Seismic Behavior of Circular Concrete Columns Reinforced by Low Bond Ultrahigh Strength Rebars
- New reinforcing bar added to ASTM as result of Pankow grant
- Behavior of CFSC-Encased Shear Connectors in Steel-Concrete Joints: Push-Out Tests
检索历史
应用推荐
