当前位置: 首页> 国外交通期刊数据库 >详情
原文传递 Out-of-Plane Design Procedure for Confined Masonry Walls
题名: Out-of-Plane Design Procedure for Confined Masonry Walls
正文语种: 英文
作者: Joel Moreno-Herrera;Jorge Varela-Rivera;Luis Fernandez-Baqueiro
作者单位: Autonomous Univ, of Yucatan
关键词: Confined masonry; Out-of-plane strength; Bidirectional strut method; Design procedure; Design example; Concrete and masonry structures.
摘要: This paper presents a design procedure to determine the out-of-plane strength of confined masonry walls. For this purpose, eight full-scale confined walls were tested in the laboratory. Walls were subjected to axial and imiform out-of-plane loads. The variables studied were the unit type and the aspect ratio of the walls. Based on the experimental results, it is observed that as the aspect ratio increases, the out-of-plane strength increases. For walls with the same aspect ratio and failure related to crushing of masonry, the out-of-plane strength depends on the axial compressive strength of masonry. Analytical out-of-plane strength of walls was determined using the bidirectional strut method. This method was validated using experimental results obtained from this and other studies. Failure of wall panel and local failure of concrete confining elements were both included in the design procedure. DOI: 10.106l/(ASCE)ST.1943-541X.0001391. © 2015 American Society of Civil Engineers.
出版日期: 2016.02
出版年: 2016
期刊名称: Journal of Structural Engineering
卷: Vol.142
期: NO.02
页码: 04015126
检索历史
应用推荐