原文传递
Eccentric-Axial-Load Test for Composite Columns Using Bolt-Connected Steel Angles
| 题名： | Eccentric-Axial-Load Test for Composite Columns Using Bolt-Connected Steel Angles |
| 正文语种： | 英文 |
| 作者： | Hyeon・Jin Kim; Hyeon・Jong Hwang; Hong-Gun Park |
| 作者单位： | Seoul National Univ.;Konkuk Univ., |
| 关键词： | angle；column；composite；axia；connection；ecce；test；load；stee；fabric |
| 摘要： | For better structural performance and constructability, a concrete-encased steel column that uses a steel cage prefabricated with bolt connections was developed. The steel cage consists of longitudinal steel angles and transverse steel plates. As a fundamental verification of the proposed column, an eccentric-axial-load test was performed on eight composite column specimens. Test parameters included column type (i.e., conventional concrete-encased steel column versus proposed column), shape and spacing of transverse plate, and axial load eccentricity. The test results showed that, owing to the high flexural stiffness of the steel angles placed at the comers of the cross section, the axial strength and ductility of the proposed column were greater than those of the conventional composite column using a wide flange steel section at the center of the cross section, particularly in the large eccentricity of axial load. Z-section plates and closely spaced flat plates used for transverse reinforcement provided better lateral confinement to the concrete, thereby increasing the load-carrying capacity of the proposed columns. In general, existing design methods safely predicted the axial-flexural capacities of the specimens. Nonlinear numerical analysis was performed to verify test results. The numerical analysis results agreed with the test results in terms of yield stiffness, peak strength, and postpeak strength degradation. |
| 出版日期： | 2020.09 |
| 出版年： | 2020 |
| 期刊名称： | Journal of Structural Engineering |
| 卷： | Vol.146 |
| 期： | No.09 |
| 页码： | 04020178 |
相关文献
- Eccentric Axial Load Test for High-Strength Composite Columns of Various Sectional Configurations
- Experimental Investigation on Flexural Behavior of U-Shaped Steel–Concrete Composite Beams with Bolt Connections under a Negative Bending Moment
- Axial Load and Cyclic Lateral Load Tests for Composite Columns with Steel Angles
- Uniaxial Eccentric-Compression Performance Analysis for Double-Plate Connected Concrete-Filled Steel-Tube Composite Columns
- Seismic Performance of a Full-Scale Two-Story Bolt-Connected Precast Concrete Composite Wall Panel Building Tested on a Shake Table
- Axial Compressive Behavior of Concrete-Encased High-Strength Steel Angle Columns
检索历史
应用推荐
