原文传递
Future Hot-Rolled Asymmetric Steel I-Beams
| 题名： | Future Hot-Rolled Asymmetric Steel I-Beams |
| 正文语种： | 英文 |
| 作者： | Matthew T. Yarnold; Eric Stoddard |
| 作者单位： | Texas A&M Univ. |
| 关键词： | future；metric；beam；roll；eams；present；stee；purpose；research；building |
| 摘要： | The purpose of the presented research is to evaluate the potential future manufacturing of hot-rolled asymmetric I-beams (AlBs) for construction in building floor systems. This technical note presents some of the primary manufacturing and structural challenges. A feasibility study is conducted to numerically evaluate the potential impact of AIBs. The first part of the study investigates composite behavior of AIBs in the final constructed state. As expected, an increase in flexural strength was observed, along with a decrease in deflections. Both are clear advantages of AIBs. The second portion of the feasibility study focuses on the noncomposite section behavior during construction. Stability concerns are present for unbraced lengths typically seen during construction. The primary finding was the benefit of reducing the thickness versus reducing the width of the top flange. Future AIB dimensions should consider thin top flanges with sufficient width to maintain adequate lateral-torsional buckling and local buckling strength. The latter portion of this technical note presents future direction of the research to comprehensively understand the behavior of hot-rolled AIBs. The focus is on extensive numerical simulation studies validated through full-scale laboratory experiments. The experiments are to be conducted on proof-of-concept AIBs produced by Nucor steel. The validated numerical modeling approaches will then be utilized for larger parametric studies to develop cross-section proportional limits (e.g., width-to-thickness ratios). These limits will be used to establish specific AIB cross-section dimensions. |
| 出版日期： | 2020.09 |
| 出版年： | 2020 |
| 期刊名称： | Journal of Structural Engineering |
| 卷： | Vol.146 |
| 期： | No.09 |
| 页码： | 06020008 |
相关文献
- Residual Stress and Global Deflection Limits for Future Hot-Rolled Steel Asymmetric I-Beams
- Full-Scale Floor System Testing for Future Hot-Rolled Asymmetric Steel I-Beams
- Behavior and Design of Normal- and High-Strength Steel SHS and RHS Columns
- Rotation Capacity of 1-Shaped Beams under Alternating Axial Forces Based on Buckling-Mode Transitions
- TARIFFS START TO HIT SOME SHIPYARDS
- Behavior of Stainless-Steel Hot-Rolled Channel Section Beam–Columns: Testing, Modeling, and Design
检索历史
应用推荐
