题名: |
APPLICATION OF FALLING WEIGHT DEFLECTOMETER DATA FOR ANALYSIS OF SUPERHEAVY LOADS. |
作者: |
Chen-D-H; Fernando-E; Murphy-M |
关键词: |
PERMITS-; SUPERHEAVY-LOADS; FALLING-WEIGHT-DEFLECTOMETERS; PAVEMENT-DEFLECTION; BACKCALCULATION-; LAYER-MODULI; BEFORE-AND-AFTER-STUDIES; COMPUTER-PROGRAMS; PREDICTIONS-; COMPARISONS-; STRUCTURAL-ADEQUACY; T-TEST; PAVEMENT-DISTRESS |
摘要: |
Permitting superheavy loads may increase the rate of pavement damage and the cost of maintenance. An analysis of a proposed superheavy load route (FM519) to evaluate the potential pavement damage caused by a planned superheavy load move is presented. Falling weight deflection (FWD) tests and backcalculations of layer moduli were performed on the FM519. FWD tests and backcalculations of layer moduli were performed on the pavement before and after the superheavy load was moved. ELSYM5 and BISAR were used to evaluate the pavement responses using the backcalculated layer moduli from FWD data. The predictions of surface deflections from ELSYM5 and BISAR were close to (within 10% of) the measured deflections from FWD tests. The FWD data and analyses show that the existing pavement structure is adequate for the planned superheavy load move. Finally, the permit was issued with the condition that the transport vehicle should be kept within the travel lanes and away from the shoulder whenever possible. FWD tests were conducted after the superheavy load move and comparisons with before superheavy load move were made. T-tests were performed to check for significant difference at the 95% confidence level. T-tests showed that there is no significant difference between before and after superheavy load move. Also, no significant distresses due to this superheavy load were observed after the move, and the pavement condition is consistent with the analysis performed to issue the permit. |
总页数: |
Transportation Research Record. 1996. (1540) pp83-90 (7 Fig., 5 Tab., 11 Ref.) |
报告类型: |
科技报告 |