原文传递
LOAD REDUCTION ON A RIGID PIPE: PILOT STUDY OF A SOFT CUSHION INSTALLATION.
| 题名： | LOAD REDUCTION ON A RIGID PIPE: PILOT STUDY OF A SOFT CUSHION INSTALLATION. |
| 作者： | Liedberg-NSD |
| 关键词： | CONCRETE-PIPES; CUSHIONING-; EXPANDED-POLYSTYRENE; FILL-EMBANKMENT; DEPTH-; EARTH-PRESSURES; SETTLEMENT-STRUCTURAL; DESIGN-; COMPUTER-PROGRAMS; SAFETY-; DEFORMATION-; LOAD-REDUCTION; RIGID-PIPES |
| 摘要： | In a project involving the construction of a new link of European Freeway E18, an 800-mm pipe was to be founded on a cushion of expanded polystyrene under an embankment fill of 9.3 m. In a pilot study measurements were taken of soil-pipe contact earth pressures around the circumference of the pipe, vertical earth pressures in the soil above the crown, relative diameter changes of the pipe in the vertical and the horizontal directions, and pipe settlements into the cushion. The design of the complete structure was partly done by using the active design program SPIDA (Soil Pipe Interaction Design and Analysis). The results indicate that the safety margin in the design was greater than first expected because the reinforced standard pipe, designed for only 5 m of fill, was uncracked, even though the height of fill was 9.3 m. The measured deformations of the pipe were smaller than those expected for the concrete to crack. The earth pressure measurements showed a pronounced soil arching effect in the soil above the pipe. |
| 总页数： | Transportation Research Record. 1997. (1594) pp217-223 (1 Phot., 8 Fig., 2 Tab., 11 Ref.) |
| 报告类型： | 科技报告 |
相关文献
- Development of a new crash-cushion concept for compatibility purposes of rigid obstacles near the road.
- Leapfrog Technology to Standardize Equipment and System Installation. Section 3. Design Criteria and Attributes for Reducing Cost.
- NUMERICAL PROCEDURE FOR PREDICTING PILE CAPACITY--SETUP/FREEZE.
- Performance Analysis of Centerline and Shoulder Rumble Strips Installed in Combination in Washington State.
- Adiem II End Terminal for Concrete Barrier. Experimental Features Project 96-01; Final rept
- Leapfrog Technology to Standardize Equipment and System Installation. Section 8. Product Modeling Criteria and Demonstration.
检索历史
应用推荐
