详情

原文传递 Lower leg injuries caused by dynamic axial loading and muscle testing.

题名：	Lower leg injuries caused by dynamic axial loading and muscle testing.
作者：	KITAGAWA-Y (Nissan Motor Co Ltd, Japan); ICHIKAWA-H (Nissan Motor Co Ltd, Japan); PAL-C (Nissan Motor Co Ltd, Japan); KING-AL (Wayne State Univ, USA); LEVINE-RS (Wayne State Univ, USA)
关键词：	AXIS-; 6405-; LOAD-; 5567-; CADAVER-; 2093-; SIMULATION-; 9103-; MATHEMATICAL-MODEL; 6473-; LEG-HUMAN; 2023-; FOOT-NOT-A-MEASURE; 9024-; INJURY-; 2163-; MUSCLE-; 2032-; DYNAMICS-; 5473-
摘要：	The effect of muscular tension on lower leg injuries was investigated in this study. Rigid body simulation was used to examine the kinematics of an occupant making a braking during a frontal crash. Muscular tension was reproduced by constant spring elements defined in the lower leg. Simulation results showed that tibial axial load was increased by the muscular tension. A series of cadaver tests was conducted to study the effect of muscular tension in detail. Dynamic axial loading was applied to human specimens with a pendulum hitting at approximately 3 m/s, The test condition represented loading to a driver's right foot stepping on a brake pedal and struck by a toe board. The metatarsal heads were placed on the brake pedal and an initial tensile force was applied on the Achiles tendon. Sixteen tests were performed on eight pairs of cadeveric lower legs. There was a significant increase in the tibial axial load in comparison with the impact load because of preloading by muscular tension. Tibial pylon fracture, which is one of the severest forms of injury of the lower leg, was frequently observed in these tests. Although the fracture load level in the tibia was almost the same as that reported in previous studies, this study shows that less external force is required to cause tibial pylon fractures with muscular tension. (A) For the covering abstract see IRRD E102514.
总页数：	PROCEEDINGS OF 16TH INTERNATIONAL TECHNICAL CONFERENCE ON THE ENHANCED SAFETY OF VEHICLES, HELD WINDSOR, ONTARIO, CANADA, 31 MAY - 4 JUNE 1998. VOLUME 2. 1998/10. (DOT HS 808 759) pp1597=607 (18 Refs.)
报告类型：	科技报告