详情

原文传递 Rail Car Impact Tests with Steel Coil: Car Crush.

题名：	Rail Car Impact Tests with Steel Coil: Car Crush.
作者：	martinez, e. zolock, j. tyrell, d.
关键词：	grade-crossing, cab car
摘要：	Two grade-crossing impact tests were conducted in June 2002 at the Federal Railroad Administrations (FRAs) Transportation Technology Center in Pueblo, Colorado as part of the FRAs research into passenger equipment crashworthiness. In both of these tests a cab car moving at approximately 14 mph impacted a standing coil of steel supported by a frangible table. The coil was positioned such that the left-side corner post of the cab car sustained the brunt of the impact. The cars were instrumented to measure the accelerations of the carbody, the displacements of the suspensions, the displacements of the corner posts, and the strains in selected structural members. The coil was instrumented to measure its three-dimensional acceleration, including yaw, pitch, and roll. On-board and wayside high-speed film and video cameras were used to record the impact. On June 4, 2002 a cab car compliant with general industry practice circa 1999 was tested and on June 7, 2002 a cab car compliant with current FRA regulations and American Public Transportation Association (APTA) Standards and Recommended Practices for Rail Passenger Equipment was tested. / Supplementary Notes: Proceedings of ASME/IEEE Joint Railroad Conference, April 22-24, 2003. Sponsored by American Society of Mechanical Engineers, New York. / Availability Note: Order this product from NTIS by: phone at 1-800-553-NTIS (U.S. customers); (703)605-6000 (other countries); fax at (703)605-6900; and email at orders@ntis.gov. NTIS is located at 5285 Port Royal Road, Springfield, VA, 22161, USA.
总页数：	u0816；10p
报告类型：	科技报告