详情

原文传递 New Mechanical Model for the Transmutation Fuel Performance Code

题名：	New Mechanical Model for the Transmutation Fuel Performance Code
作者：	Gregory K. Miller;
关键词：	Transmutation Fuel Performance Code11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; ALGORITHMS; CONVERGENCE; CREEP; ELASTICITY; IMPLEMENTATION; PERFORMANCE; PLASTICITY; PLASTICS; STRAINS; TRANSMUTATION; UNLOADING
摘要：	A new mechanical model has been developed for implementation into the TRU fuel performance code. The new model differs from the existing FRAPCON 3 model, which it is intended to replace, in that it will include structural deformations (elasticity, plasticity, and creep) of the fuel. Also, the plasticity algorithm is based on the 鈥減lastic strain鈥搕otal strain鈥?approach, which should allow for more rapid and assured convergence. The model treats three situations relative to interaction between the fuel and cladding: (1) an open gap between the fuel and cladding, such that there is no contact, (2) contact between the fuel and cladding where the contact pressure is below a threshold value, such that axial slippage occurs at the interface, and (3) contact between the fuel and cladding where the contact pressure is above a threshold value, such that axial slippage is prevented at the interface. The first stage of development of the model included only the fuel. In this stage, results obtained from the model were compared with those obtained from finite element analysis using ABAQUS on a problem involving elastic, plastic, and thermal strains. Results from the two analyses showed essentially exact agreement through both loading and unloading of the fuel. After the cladding and fuel/clad contact were added, the model demonstrated expected behavior through all potential phases of fuel/clad interaction, and convergence was achieved without difficulty in all plastic analysis performed. The code is currently in stand alone form. Prior to implementation into the TRU fuel performance code, creep strains will have to be added to the model. The model will also have to be verified against an ABAQUS analysis that involves contact between the fuel and cladding.
报告类型：	科技报告