原文传递
A Wind Tunnel Study of Icing Effects on a Business Jet Airfoil
| 题名： | A Wind Tunnel Study of Icing Effects on a Business Jet Airfoil |
| 作者： | Addy, Harlod E., Jr.; Broeren, Andy P.; Zoeckler, Joesph G.; Lee, Sam |
| 关键词： | tunnel；sines；foil；ects；study；shape；dimension；observe；chord；profiles |
| 摘要： | Aerodynamic wind tunnel tests were conducted to study the effects of various ice accretions on the aerodynamic performance of a 36-inch chord, two-dimensional business jet airfoil. Eight different ice shape configurations were tested. Four were castings made from molds of ice shapes accreted in an icing wind tunnel. Two were made using computationally smoothed tracings of two of the ice shapes accreted in the icing tunnel. These smoothed profiles were then extended in the spanwise direction to form a two-dimensional ice shape. The final two configurations were formed by applying grit to the smoothed ice shapes. The ice shapes resulted in as much as 48 reduction in maximum lift coefficient from that of the clean airfoil. Large increases in drag and changes in pitching moment were also observed. The castings and their corresponding smoothed counterparts yielded similar results. Little change in performance was observed with the addition of grit to the smoothed ice shapes. Changes in the Reynolds number (from 3 x 10(exp 6) to 10.5 x 10(exp 6) and Mach number (from 0.12 to 0.28) did not significantly affect the iced-airfoil performance coefficients. |
| 报告类型： | 科技报告 |
相关文献
- Experimental Investigation of Water Droplet Impingement on Airfoils, Finite Wings, and an S-Duct Engine Inlet
- New Spray Bar System Installed in NASA Lewis' Icing Research Tunnel
- Geometry Modeling and Grid Generation for Computational Aerodynamic Simulations Around Iced Airfoils and Wings
- A Study of Ice Accretion Physics to Improve the Ice Accretion on Airfoils
- Validation of 3-D Ice Accretion Measurement Methodology for Experimental Aerodynamic Simulation.
- Ultrasonic techniques for aircraft ice accretion measurement
检索历史
应用推荐
