摘要: |
This report documents the first experience of using self-consolidating concrete for pretressed concrete bridge girders in North Carolina. Under construction in eastern North Carolina was a multi-span bridge which used one hundred thirty AASHTO Type III girders, each 54.8 ft (16.7 m) long. To demonstrate the full-scale field production of self-consolidating concrete, and for comparative purposes, three girders from one production line of five girders were selected for the experimentation. Two of the girders were cast with self-consolidating concrete and one with normal concrete as control. The plastic and hardened properties of both the self-consolidating concrete and the normal concrete were monitored and measured. The plastic properties of self-consolidating concrete included unit weight, air content, slump flow, visual stability index (VSI), and passing ability measured by J-ring and L-box. Hardened properties of the two concretes included temperature development during curing, compressive strength, elastic modulus, and flexural tensile strength, creep and shrinkage. The prestressing force was monitored by load cells . The transfer lengths of prestressing strands were determined by embedded strain gauges , and from the measured strand end-slips. Finally, the three girders were tested in flexure up to the design service load to determine and compare their loaddeformation characteristics. Based on the satisfactory results of this study, the two prestressed SCC girders were installed in the bridge for service as other normal concrete girders. / NOTE: Final rept. (Nov. 2003 - Mar. 2005). / Supplementary Notes: Sponsored by North Carolina Dept. of Transportation, Raleigh. and Federal Highway Administration, Raleigh, NC. North Carolina Div. / Availability Note: Order this product from NTIS by: phone at 1-800-553-NTIS (U.S. customers); (703)605-6000 (other countries); fax at (703)605-6900; and email at orders@ntis.gov. NTIS is located at 5285 Port Royal Road, Springfield, VA, 22161, USA. |