原文传递
Reconstruction of Railroads and Highways with In-Situ Reclamation Materials.
| 题名： | Reconstruction of Railroads and Highways with In-Situ Reclamation Materials. |
| 关键词： | in-situ；material；recon；roads；clam；struc；matio；deform；with；resilient |
| 摘要： | The resilient modulus and plastic deformation of recycled roadway materials with and without fly ash stabilization were characterized using a large-scale model experiment (LSME). Stabilization of recycled pavement materials (RPM) and road surface gravel RSG with 10% by weight of Class C fly ash increased the summary resilient modulus (SRM) two to five times. Moreover, the SRM increased with layer thickness in the LSME. The RPM and RSG exhibited the rate of plastic deformation three to four times higher than the Class 5 base. Stabilized RPM and RSG had the lowest plastic deformation. The moduli obtained from the large-scale model experiment (LSME) were used to develop an equivalency-based design for the recycled materials with and without fly ash. Stabilization of the recycled materials by cementitious fly ash reduced the required thickness of a pavement base course up to 30% in accordance with AASHTO-1993 design guide. The SRM and plastic deformation from LSME tests were incorporated in the Mechanistic Empirical Pavement Design Guide (MEPDG) to predict the lifetime expectancy of the recycled materials in a pavement alone and with fly ash stabilization. The results showed that stabilization of recycled materials with fly ash increases the lifetime of pavements constructed with 0.3-m-thick alternative recycled materials from 17 to 21 years. A testing protocol and guidelines for testing fouled railway ballast was developed due to the lack of consistent and systematic testing guidelines in the literature and in rail engineering practice. The effect of fouling (internally generated mineral fouling, external coal fouling due to surface spillage, and clay fouling due to subgrade intrusion) on the permanent (plastic) deformation of ballast under traffic loading was studied using the developed testing protocol. |
| 报告类型： | 科技报告 |
相关文献
- Development of an In situ Method for Continuous Evaluation of the Resilient Modulus of Pavement Subgrade; Master's thesis
- Dynamic Behaviour of Multi-phase Materials.
- Testing Program for the Falling-Weight Deflectometer; Special rept. (Interim)
- Use of Dynamic Cone Penetrometer in Subgrade and Base Acceptance.
- Ground-Penetrating Radar Calibration at the Virginia Smart Road and Signal Analysis to Improve Prediction of Flexible Pavement Layer Thicknesses.
- Ground-Penetrating Radar Calibration at the Virginia Smart Road and Signal Analysis to Improve Prediction of Flexible Pavement Layer Thicknesses.
检索历史
应用推荐
