详情

原文传递 Fiber-Optic Aircraft Lightning Current Measurement Sensor.

题名：	Fiber-Optic Aircraft Lightning Current Measurement Sensor.
作者：	Ely, J. J.; Nguyen, T. X.; Szatkowski, G. N.
关键词：	Dynamic Range; Electromagnetic Interference; Faraday Effect; Fiber Optics; High Current; Lasers; Lightning; Magnetic Field Configurations; Polarimetry; Polarization(waves)
摘要：	A fiber-optic current sensor based on the Faraday Effect is developed for aircraft installations. It can measure total lightning current amplitudes and waveforms, including continuing current. Additional benefits include being small, lightweight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate in presence of magnetic field in the direction of light propagation. Measuring the total induced light polarization change yields the total current enclosed. The system operates at 1310nm laser wavelength and can measure approximately 300 A - 300 kA, a 60 dB range. A reflective polarimetric scheme is used, where the light polarization change is measured after a round-trip propagation through the fiber. A two-detector setup measures the two orthogonal polarizations for noise subtraction and improved dynamic range. The current response curve is non-linear and requires a simple spline-fit correction. Effects of high current were achieved in laboratory using combinations of multiple fiber and wire loops. Good result comparisons against reference sensors were achieved up to 300 kA. Accurate measurements on a simulated aircraft fuselage and an internal structure illustrate capabilities that maybe difficult with traditional sensors. Also tested at a commercial lightning test facility from 20 kA to 200 kA, accuracy within 3-10% was achieved even with non-optimum setups.
报告类型：	科技报告