原文传递
Seismic Response Comparison of Full-Scale Moment-Resisting Timber Frame and Joint Test Result
| 题名： | Seismic Response Comparison of Full-Scale Moment-Resisting Timber Frame and Joint Test Result |
| 正文语种： | eng |
| 作者： | Tokikatsu Namba;Takafumi Nakagawa;Hiroshi Isoda;Yuji Kado;Ryuki Odani;Atsuo Takino |
| 作者单位： | Kyoto Univ.;Kyoto Univ.;Kyoto Univ.;Japan Aerospace Exploration Agency (JAXA);New Constructor’s Network Co. Ltd.;Osaka Institute of Technology |
| 关键词： | Moment-resisting timber frame (MRTF);Time-history response analysis;Parameter identification;Shaking table test |
| 摘要： | Abstract This paper presents the seismic performance of the moment-resisting timber frame (MRTF). In Japanese urban areas, there are many urban small houses, and it is difficult to design a wooden building to ensure both the seismic performance and the comfortable plan that effectively makes use of small and constrained sites, and it also lacks flexibility in the design. Therefore, expectations are rising for high performance of MRTF using residential members. In this study, to clarify the seismic performance and the dynamic behavior under the heavy seismic wave, we conducted a full-shaking table test of the 2-story MRTF composed of residential members with short sides. The structure was designed by the allowable stress design (ASD) to resist 1.5 times the earthquake ground motion required in Japanese Building Standard Law (BSL) and linear analysis under frequent loading conditions (snow, wind, and earthquake events corresponding to a return period of approximately 50 years), and the unidirectional full-scale shaking table tests were conducted. The structure did not collapse up to a peak ground acceleration of 0.87 g and experienced ∼1/20 rad of maximum interstory drift. This indicates that an MRTF designed by the method can secure the seismic performance for a large earthquake. The time-response analysis was also conducted based on the joint tests, but the stiffness of the analytical result is little lower than the experimental result. Then, we tried the parameter identification using quality engineering to reproduce the experimental behavior. The results indicated that the moment resistance of the joint was higher because of the stressed-skin effect of the floor. |
| 出版年： | 2023 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 149 |
| 期： | 7 |
| 页码： | 04023079.1-04023079.15 |
相关文献
- Experimental Study of the Seismic Performance of Concrete Beam-Column Frame Joints with DfD Connections
- Seismic Design of CLT Shear-Wall and Glulam Moment-Resisting Frame Coupled Structure
- Seismic Performance of Timber–Steel Hybrid Structures. I: Subassembly Testing and Numerical Modeling
- Seismic Performance of Three-Story Cross-Laminated Timber Structures in Japan
- Measured Seismic Behavior of Hybrid Masonry Structural Systems
- This paper examines the structural response of cold-formed steel-framed building lateral force-resisting systems under combinations of simulated earthquake and fire loading. Full-scale experiments with gypsum-sheet steel composite panel sheathed walls, oriented strand board sheathed walls, and steel strap braced walls are presented. Twenty-two test specimens are subjected sequentially to combinations of cyclic shear deformation and fires of varying intensity; some approximate temperatures in standard furnace tests, and most have characteristics of actual building fires. In select tests, the walls are predamaged to simulate fire following an earthquake. The results show a progressive decrease of postfire lateral load capacity with increasing fire intensity for all walls; however, each wall type exhibits varied sensitivity to the fire intensity as well as to predamage. By understanding the response of these structural systems in real fires, designers can better plan for situations in which multiple hazards, including fire, exist. DOI: 10.106l/(ASCE)ST.1943-541X.0002610. © 2020 American Society of Civil Engineers.
检索历史
应用推荐
