原文传递
Net Section Failure of S690 High-Strength Steel Angle-to-Plate Connections
| 题名： | Net Section Failure of S690 High-Strength Steel Angle-to-Plate Connections |
| 正文语种： | eng |
| 作者： | Jiang, Ke;Zhao, Ou |
| 作者单位： | Nanyang Technol Univ Sch Civil & Environm Engn Singapore 639798 Singapore;Nanyang Technol Univ Sch Civil & Environm Engn Singapore 639798 Singapore |
| 关键词： | Design analysis;Gusset plate connection;High-strength steel;Net section fracture;Numerical modeling;Press-braked angle section;Shear lag effect;Tension tests |
| 摘要： | The net section fracture behavior and resistance of S690 high-strength steel angle-to-plate connections were investigated in this paper, underpinned by testing and numerical modeling. The experiments were conducted on 23 S690 high-strength steel angle-to-plate connections, with each comprising an equal- or unequal-leg press-braked angle section member bolted to gusset plates by one leg. The test procedures and setup and the key observed results were fully presented and analyzed. The experimental program was supplemented by a numerical modeling program with which finite element models were first developed and validated against the experimental responses and afterward adopted to perform parametric studies to produce additional numerical data. Based on the test and numerical data, the codified design rules for S690 high-strength steel angle-to-plate connections with net section fracture were evaluated. The results of the evaluation revealed that (1) the American specification leads to consistent but unsafe failure load predictions, (2) the European code yields conservative and scattered failure load predictions, and (3) the Australian standard results in scattered, though accurate on average, predictions of failure load, and many of the predicted failure loads are unsafe. Finally, a new design method was proposed and shown to offer substantially improved failure load predictions for S690 high-strength steel angle-to-plate connections over the design codes. |
| 出版年： | 2022 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 148 |
| 期： | 4 |
| 页码： | 04022021.1-04022021.13 |
相关文献
- Experimental and Numerical Investigations of S690 High-Strength Steel Welded I-Sections under Combined Compression and Bending
- Experimental and Numerical Study of Press-Braked S690 High-Strength Steel Channel–Section Columns Failing by Minor-Axis Flexural Buckling
- Failure Modes and Bearing Capacity of High-Strength–Steel-Bearing-Type Bolted Connections
- Axial Compressive Behavior of Concrete-Encased High-Strength Steel Angle Columns
- Flexural Behavior and Rotation Capacity of Welded Ⅰ-Beams Made from 690-MPa High-Strength Steel
- Flexural Buckling of Hot-Finished High-Strength Steel SHS and RHS Columns
检索历史
应用推荐
