原文传递
Axial Compressive Mechanical Behaviors of a Double-Layer Member
| 题名： | Axial Compressive Mechanical Behaviors of a Double-Layer Member |
| 正文语种： | eng |
| 作者： | Li-Min Tian;Bei-Bei Jin;Lei Li |
| 作者单位： | Xi’an Univ. of Architecture and Technology;Xi’an Univ. of Architecture and Technology;Zhengzhou Univ. of Aeronautics |
| 关键词： | Double-layer member (DLM);Compressive mechanical behavior;Failure mechanism;Parametric study;Ultimate load |
| 摘要： | Abstract The instability of structural members under axial compression most likely causes spatial structural collapse. Therefore, the configuration of double-layer members (DLMs) is proposed in this study to improve the stability of compression members. Experiments on four specimens (two single-layer members and two DLMs) were conducted, where the failure mechanism was revealed based on analysis of a validated finite-element (FE) model. Parametric studies were also performed to investigate the effects of different parameters on the compressive mechanical behaviors of the DLMs. Results showed that the desired failure mode of the DLMs was high-order buckling with torsion of the inner tube and no global buckling failure prior to contact between the outer tube and end plate (HTCG). Under the failure mode of HTCG, the ultimate load and ductility were greatly improved due to the constraint of the outer tube. Finally, predictions of the crucial loads derived from the equilibrium differential equation and empirical formula were in good agreement with the test and FE results. |
| 出版年： | 2023 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 149 |
| 期： | 8 |
| 页码： | 04023110.1-04023110.14 |
相关文献
- Double-layer speed optimization for reducing fuel consumption with vehicle-to-infrastructure communication
- Impact Response of Double-Layer Steel-RULCC-Steel Sandwich Panels: Experimental, Numerical, and Analytical Approaches
- Contribution of Type-X Gypsum Wall Board to the Racking Performance of Light-Frame Wood Shear Walls
- Flexural Performance of UHPC-Concrete-ECC Composite Member Reinforced with Perforated Steel Plates
- Experimental Study of Square and Rectangular CFDST Sections with Stainless Steel Outer Tubes under Axial Compression
- Mechanical Performance of Glue-Pressed Engineered Honeycomb Bamboo under Axial Compression
检索历史
应用推荐
