原文传递
Lateral Torsional Buckling Response of Compact I-Shaped Welded Steel Girders
| 题名： | Lateral Torsional Buckling Response of Compact I-Shaped Welded Steel Girders |
| 正文语种： | eng |
| 作者： | Xiao Lin “Dimple” Ji;Sheldon C. Twizell;Robert G. Driver;Ali Imanpour |
| 作者单位： | Univ. of Alberta;Univ. of Alberta;Univ. of Alberta;Univ. of Alberta |
| 关键词： | Welded steel girders;Lateral torsional buckling;Experimental testing;Design standards |
| 摘要： | Abstract Recent studies investigating lateral torsional buckling suggest that North American steel design provisions may overestimate the bending resistance of welded girders that buckle laterally in the inelastic range. Furthermore, these provisions do not distinguish between rolled and welded members, but welded girders are widely suspected of possessing unfavorable residual stress distributions that may cause them to be more susceptible to lateral torsional buckling than their rolled counterparts. However, lack of sufficient supporting experimental test data may render existing analytically based assessments of the design equations inadequate. To address the paucity of physical testing, an experimental program was developed to determine the lateral torsional buckling resistance of full-scale I-shaped welded three-plate steel girders fabricated with current shop processes. This paper describes the development of the test program and a unique girder-stability test bed. Test results for seven girders, including measured initial geometric imperfections, load–displacement responses, and moment capacities, are then presented. A finite-element model of the test specimens, validated against the test data, is finally used to investigate the adequacy of the beam design provisions specified in the Canadian and US steel design standards. The results confirm that the current design equations can accurately predict the moment resistance of compact welded steel girders that fail in either the elastic or inelastic lateral torsional buckling mode. |
| 出版年： | 2022 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 148 |
| 期： | 10 |
| 页码： | 04022149.1-04022149.13 |
相关文献
- Lateral–Torsional and Distortional Buckling of I-Shaped Welded Steel Girders
- Strength and Plastic Rotation Capacity of Ⅰ-Shaped Beams with Grid-Purlin System Subjected to Cyclic Loading
- Lateral Torsional Buckling of Welded Stainless Steel I-Profile Beams: Experimental Study
- I-Shaped Unreinforced Masonry Wallettes with a Soft-Layer Bed Joint: Behavior under Static-Cyclic Shear
- Lateral-Torsional Buckling of Singly Symmetric I-Girders with Stepped Flanges
- Elastic Global Lateral-Torsional Buckling of Straight 1-Shaped Girder Systems
检索历史
应用推荐
