原文传递
Experimental and Analytical Study on the Compressive Arch Action of Precast Concrete Assemblies with Monolithic Connections to Resist Progressive Collapse
| 题名： | Experimental and Analytical Study on the Compressive Arch Action of Precast Concrete Assemblies with Monolithic Connections to Resist Progressive Collapse |
| 正文语种： | eng |
| 作者： | Shi-Lin Liang;Zhi Li;Chun-Lin Wang;Kai Qian |
| 作者单位： | Hohai Univ.;Guilin Univ. of Technology;Southeast Univ.;Guilin Univ. of Technology |
| 关键词： | Progressive collapse;Precast concrete (PC);Connections;Compressive arch action (CAA);Analytical model |
| 摘要： | Abstract Although the first progressive collapse event occurred in precast concrete (PC) buildings due to gas explosions, the behavior of PC buildings resisting progressive collapse is still unclear because related tests are few, and the types of PC connections vary. To study the progressive collapse resistance of monolithic PC beam-column assemblies under a middle column removal scenario, an experimental program including four PC assemblies and one reinforced concrete (RC) assembly is conducted. These PC assemblies contain different types of beam-column connections, including connections of lap-splice, 90° hook anchorage, U-shaped bar, and combined U-shaped bar and 30° hook anchorage. The test results demonstrate that flexural action, compressive arch action (CAA), and catenary action were mobilized in sequence in the beams of RC and PC assemblies. Thus, in general, the development of load resisting mechanisms of PC assemblies is similar to that of RC assemblies, although different types of connections may affect the magnitude of each mechanism. The PC assemblies with 90° hook anchorage and U-shaped bar connections attained a CAA capacity similar to that of the RC assembly, whereas the PC assembly with the combined connections had a greater CAA capacity because of plastic hinge relocation at the beam ends near the middle column. The PC assembly with lap-splice connections achieved the lowest CAA capacity due to the anchorage failure of the beam bottom rebar. However, this PC assembly attained the greatest catenary action capacity, because the beam bottom rebar did not fracture and could still develop tension. Subsequently, an analytical model is proposed to reveal the nature of CAA and to better understand the influence of critical parameters. |
| 出版年： | 2023 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 149 |
| 期： | 4 |
| 页码： | 1-15 |
相关文献
- Experimental Study on Composite Beam with Various Connections under Midspan Impact Scenarios
- Progressive Collapse Resistance of Posttensioned Concrete Beam-Column Subassemblages with Unbonded Posttensioning Strands
- Design of load-bearing precast concrete buildings to resist progressive collapse
- Progressive Collapse Resistance of Precast Concrete Frames with Discontinuous Reinforcement in the Joint
- Effects of High-Strength Concrete on Progressive Collapse Resistance of Reinforced Concrete Frame
- Progressive Collapse Resistance of Emulative Precast Concrete Frames with Various Reinforcing Details
检索历史
应用推荐
