原文传递
Experimental and Numerical Investigations on Closely Spaced Built-Up Angle Members
| 题名： | Experimental and Numerical Investigations on Closely Spaced Built-Up Angle Members |
| 正文语种： | eng |
| 作者： | Loris Saufnay;André Beyer;Jean-Pierre Jaspart;Jean-François Demonceau |
| 作者单位： | Univ. of Liège;Centre Technique Industriel de la Construction Métallique;Univ. of Liège;Univ. of Liège |
| 关键词： | Laboratory tests;Built-up members;Angle sections;Lattice towers |
| 摘要： | Abstract This paper presents the results of 10 laboratory tests performed on closely spaced built-up members fabricated from hot-rolled angle sections. Such members are of special interest in the construction and reinforcement of steel lattice towers used for telecommunication or electrical transmission lines. The angle sections used in this study were star-battened with pinned support conditions. In particular, two configurations were studied: star-battened angles with equal sections (SBE) (composed of two chords with the same section), and star-battened angles with unequal sections (SBU) (composed of two chords with different sections). The influence of connection spacing along the members and different types of connections (fully preloaded bolts, partially preloaded bolts) were also studied. In addition, the important influence of geometric imperfections on failure load and failure mode were analyzed. In this paper, a numerical model is introduced after the laboratory tests are presented. The model was built in ANSYS version 18.2 and was validated based on the results obtained during the experimental campaign. The numerical results highlighted the sensitivity of failure modes to initial imperfections (out-of-straightness, load eccentricity). Last, the validated numerical model is thought to be used in a wider parametric study with the aim of developing new design recommendations. |
| 出版年： | 2023 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 149 |
| 期： | 4 |
| 页码： | 1-16 |
相关文献
- Behavior of Cold-Formed Steel Built-Up Sections with Intermediate Stiffeners under Bending. II: Parametric Study and Design
- Distortional Buckling-Moment Resistance Capacity of Hybrid Double-I-Box Beams
- Design of Slender Built-Up Back-to-Back CFS Channel Columns with Pinned Warping-Free Ends
- Beam-Column Tests of Cold-Formed Steel Built-Up Closed Sections
- Behavior of Cold-Formed Steel Built-Up Sections with Intermediate Stiffeners under Bending. I: Tests and Numerical Validation
- Investigation on Built-up, Population, and Road Network Density Dynamics Using GIS, Regression, and Causation Analysis: A Case Study of Hyderabad City, India
检索历史
应用推荐
