原文传递
Progress in Catalytic Ignition Fabrication and Modeling: Modeling Part 2.
| 题名： | Progress in Catalytic Ignition Fabrication and Modeling: Modeling Part 2. |
| 作者： | Beyerlein, S.; Budwig, R.; Steciak, J. |
| 关键词： | Air Pollution Control; Catalytic Ignition; Clean Fuels; Combustion; Emissions; Ethanol; Ignition Systems; Transportation Fuels |
| 摘要： | The ignition temperature and heat generation from oxidation of methane on a platinum catalyst were determined experimentally. A 127 micron diameter platinum coiled wire was placed crosswise in a quartz tube of a plug flow reactor. A source meter with a 4-wire measurement capability measured the resistance and current to calculate the average temperature of the surface reaction. Light-off temperatures varied from 730-780K for methane for a fuel-oxygen equivalence ratio of 0.3 to 1.0 at fuel percentages of 2-5% by volume. A model of the experimental system was created using Fluent coupled with Chemkin to combine an advanced chemistry solver with flow simulation. The experimental data was compared to the model results, which includes heat transfer and the surface reaction kinetics of methane on platinum. The heat transfer model obtained values close to experimental data for temperatures between 400K and 700K. At temperatures greater than 700K the model deviated with temperatures greater than the experimental results. |
| 报告类型： | 科技报告 |
相关文献
- Progress in Catalytic Ignition Fabrication and Modeling: Fabrication Part 1.
- Progress in Catalytic Ignition Fabrication and Modeling: Fabrication Part 1.
- Vulnerability Methodology and Protective Measures for Aircraft Fire and Explosion Hazards. Volume 2. Aircraft Engine Nacelle Fire Test Programs. Part 2. Small Scale Testing of Dry Chemical Fire Extinguishants
- Compression Ratio and Catalyst Aging Effects on Aqueous Ethanol: Finite Element Model of a Heated Wire Catalyst in Cross Flow.
- Modeling and Application of Catalytic Ignition in Internal Combustion Engines. Final rept. Aug 02-Dec 03.
检索历史
应用推荐
