详情

原文传递 Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations under Flexure Loads.

题名：	Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations under Flexure Loads.
作者：	Nordendale, N.; Goyal, V.; Lundgren, E.; Patel, D.; Farrokh, B.; Jones, J.; Fischetti, G.; Segal, K.
关键词：	Structural failure, Predictions, Curved panels, Defects, Bend tests, Autoclaves, Sandwich structures, Delaminating, Flexing, Loads (forces), Composite materials, Bonded joints, Rocket engine cases, Finite element method, Mathematical models, Deflection, Image correlators
摘要：	An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and facesheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.
总页数：	Nordendale, N.; Goyal, V.; Lundgren, E.; Patel, D.; Farrokh, B.; Jones, J.; Fischetti, G.; Segal, K.
报告类型：	科技报告