Explosioner i en förtätad stadsmiljö
| 项目名称： | Explosioner i en förtätad stadsmiljö |
| 摘要： | With the aim of making attractive land space available for further development, there is today a desire in many cities to implement a densification of the existing urban environment. However, such densification, e.g. over decking, leads to a reduced free distance between buildings and transport route, which results in increased demands for exceptional accidents such as explosions. To create an optimal overall solution for such an accidental scenario it is necessary that the three sub-areas of risk management, explosion load and structural response are properly coordinated. In today's handling of explosions, there are significant shortcomings among both risk analysts and structural engineers. A contributing reason for this is partly that communication between these two groups is inadequate and partly that the level of knowledge about explosions is often insufficient. An explosive load creates an intense load pulse of short duration that can cause a structural response that differs significantly from that normally obtained under static load. This puts special demands on the design of explosion loaded structures, for which there are currently no adequate instructions. For the Swedish Transport Administration this is of interest for e.g. explosion in tunnels/overdeckings or bridge columns or protective piers subjected to impact. It may also be applicable to buildings that do not belong to the Swedish Transport Administration, but which may be affected by the proximity of their transport routes. The overall aim of the project is to contribute to increased national competence development in the field of explosions. One of its goals is to bridge the gap between risk analyst and structural engineer by clarifying the link between an explosion and its consequences. However, the intention is not to work with risk per se, but rather with the development of tools that can then be used in risk management. Other objectives are to develop simplified methods for determining the explosion load and to improve existing methods for determining the resistance of a structure subjected to an explosion load. The focus will be on developing simplified computational models for explosion loads and structural response, in order to approximately take into account various types of complex phenomena, and thereby make these available to a wider range of structural engineers. |
| 资金： | 0.00 |
| 资助组织： | Trafikverket |
| 项目负责人： | Johansson, Morgan |
| 执行机构： | Chalmers tekniska högskola AB |
| 开始时间： | 20200901 |
| 预计完成日期： | 20230831 |
| 主题领域： | Bridges and other structures；I20: Design and Planning of Transport Infrastructure |
相关文献
- GoMate: Diversifierad effordonspool f�r den f�rt�tade staden
- PROPAGATION DES ONDES MECANIQUES DANS LES SOLIDES
- Conduct International Aircraft Materials Fire Test Working Group Meetings.
- Inter-Laboratory Study for the Indirect Tensile Test at High Temperature and Rapid Rutting Test
- CONFLITS, SOURCE D'INFORMATION INTEGREE POUR DETECTER LES LIEUX A RISQUE D'ACCIDENT POUR L'ENSEMBLE DES USAGERS INCLUANT LES PIETONS ET LES PERSONNES AGEES
- DES MODELES ANALYTIQUES CONTINUS DE PLANIFICATION DE SYSTEMES DE DISTRIBUTION
检索历史
应用推荐
