详情

原文传递 Experimental Study of Longitudinally Stiffened Web Channels Subjected to Combined Bending and Shear

题名：	Experimental Study of Longitudinally Stiffened Web Channels Subjected to Combined Bending and Shear
其他题名：	AISI.(2012)."North American specification for the design of cold-formed steel structural members."NAS S100-2012,American Iron and Steel Institute,Washington,DC.
正文语种：	英文
作者：	Cao Hung Pham
关键词：	Cold-formed sections;High strength steel;Longitudinal web stiffener;Complex channel sections;Shear strength;Direct strength method;Metal and composite structures
摘要：	The direct strength method (DSM) of design of cold-formed sections has been recently extended in the North American Specification for Cold-Formed Steel Structural Members NAS S100:2012 to include shear. The two new features of the DSM rules for shear researched are the effect of full-section shear buckling as opposed to web-only shear buckling and tension field action (TFA). The prequalified sections in the rules include sections with flat webs and webs with small intermediate longitudinal stiffeners. In order to extend the range to larger intermediate stiffeners as occurs in practice, a series of fourteen shear tests have been performed at the University of Sydney for C-sections with rectangular stiffeners of varying sizes. Six different types of stiffeners were tested with an additional preferred plain section. Each type of section was tested twice to ensure accuracy. As the web stiffener sizes increase, the shear buckling and strength of the sections are expected to improve accordingly. However, the tests show that the shear ultimate strengths only increase slightly in association with the respective increases of stiffener sizes. The test results are compared with the DSM design rules for shear and found to be lower than those predicted by the DSM curve for shear with TFA. The test failures were observed mainly due to the combined bending and shear modes. The effect of the bending is therefore significant and starts to govern when the shear capacity is significantly strengthened by adding the large longitudinal web stiffener. The test results are subsequently plotted against the DSMinteraction curves between bending and shear, where the interaction is found to be significant. Recommendations for prequalified sections with longitudinally stiffened web channels in combined bending and shear are validated in the paper.
出版年：	2015
论文唯一标识：	P-26Y2015V141N11003
英文栏目名称：	Technical Papers
doi：	10.1061/(ASCE)ST.1943-541X.0001259
期刊名称：	Journal of Structural Engineering
拼音刊名(出版物代码)：	P-26
卷：	141
期：	11
页码：	10-18