原文传递
Shear Capacity of Cold-Formed Steel Channels with Edge-Stiffened Web Holes, Unstiffened Web Holes, and Plain Webs
| 题名： | Shear Capacity of Cold-Formed Steel Channels with Edge-Stiffened Web Holes, Unstiffened Web Holes, and Plain Webs |
| 正文语种： | eng |
| 作者： | Che, Boshan;Roy, Krishanu;Fang, Zhiyuan;Uzzaman, Asraf;Pham, Cao Hung;Raftery, Gary M.;Lim, James B. P. |
| 作者单位： | Univ Auckland Dept Civil & Environm Engn Auckland 1010 New Zealand;Univ Auckland Dept Civil & Environm Engn Auckland 1010 New Zealand;Univ Auckland Dept Civil & Environm Engn Auckland 1010 New Zealand;Univ West Scotland Sch Comp Engn & Phys Sci Paisley G72 0LH Renfrew Scotland;Univ Sydney Sch Civil Engn Sydney NSW 2006 Australia;Univ Auckland Dept Civil & Environm Engn Auckland 1010 New Zealand;Univ Auckland Dept Civil & Environm Engn Auckland 1010 New Zealand |
| 关键词： | Cold-formed steel;Channels;Shear capacity;Edge-stiffened web holes;Experiments;Finite element analysis |
| 摘要： | In this paper, a total of 254 results comprising 30 shear tests and 224 finite element (FE) analysis results are reported. Simply supported test specimens of cold-formed steel (CFS) channels with aspect ratios of 1.0 and 1.5 were tested. For comparison, specimens with unstiffened web holes and plain webs were also tested. A nonlinear elastoplastic FE model was then developed and validated against the experimental results. Using the validated FE model, a parametric study was conducted to investigate the effect of various influential parameters on the shear capacity of such CFS channels. The test results show that for a channel with edge-stiffened web holes, the shear capacity increased by 14.5% on average when compared with that of a channel with unstiffened web holes. The test and FE results were compared against the design predictions. Upon comparison, it was found that the design rules of CFS channels with unstiffened web holes in accordance with the AISI and AS/NZS can be unconservative by 7% while calculating the shear capacity of CFS channels with edge-stiffened web holes. Therefore, a suitable design formula in the form of a shear capacity reduction factor was proposed for CFS channels with edge-stiffened web holes. |
| 出版年： | 2022 |
| 期刊名称： | Journal of structural engineering |
| 卷： | 148 |
| 期： | 2 |
| 页码： | 04021268.1-04021268.19 |
相关文献
- Shear Strength Experiments and Design of Cold-Formed Steel Channels with Web Holes
- Direct Strength Method of Design for Channel Sections in Shear with Square and Circular Web Holes
- Experimental Study of Longitudinally Stiffened Web Channels Subjected to Combined Bending and Shear
- Experimental Investigation of Cold-Formed Steel Framed Shear Wall Using Corrugated Steel Sheathing with Circular Holes
- Transverse Stiffener Requirements for Shear Postbuckling of Cold-Formed Steel Channels
- Behavior and Design of Cold-Formed Steel Web-Stiffened Channels under Concentrated Bearing Loads
检索历史
应用推荐
