详情

原文传递 Reduction of Emissions from a High Speed Ferry

题名：	Reduction of Emissions from a High Speed Ferry
作者：	Thompson, G. J.; Gautam, M.; Clark, N. N.; Lyons, D. W.; Carder, D.; Riddle, W.; Barnett, R.; Rapp, B.; George, S.
关键词：	Ferries##High speed transport ships##Exhaust emissions##Particulates##Marine transportation##Diesel engines##High speed transportation##Hydrofoil craft##Water injection##Emissions##Fuel consumption##Quality assurance##Quality control##Engine performance##Particulate air pollutants##Ferry boats##Ultralow sulfur diesel##
摘要：	Emissions from marine vessels are being scrutinized as a major contributor to the total particulate matter (TPM), oxides of sulfur (SOx) and oxides of nitrogen (NOx) environmental loading. Fuel sulfur control is the key to SOx reduction. Significant reductions in the emissions from on-road vehicles have been achieved in the last decade and the emissions from these vehicles will be reduced by another order of magnitude in the next five years: these improvements have served to emphasize the need to reduce emissions from other mobile sources, including off road equipment, locomotives, and marine vessels. Diesel-powered vessels of interest include ocean going vessels with low- and medium-speed engines, as well as ferries with high speed engines, as discussed below. A recent study examined the use of intake water injection (WIS) and ultra low sulfur diesel (ULSD) to reduce the emissions from a high-speed passenger ferry in southern California. One of the four Detroit Diesel 12V92 two-stroke high speed engines that power the Waverider (operated by SCX, inc.) was instrumented to collect intake airflow, fuel flow, shaft torque, and shaft speed. Engine speed and shaft torque were uniquely linked for given vessel draft and prevailing wind and sea conditions. A raw exhaust gas sampling system was utilized to measure the concentration of NOx, carbon dioxide (CO2), and oxygen (O2) and a mini dilution tunnel sampling a slipstream from the raw exhaust was used to collect TPM on 70 mm filters. The emissions data were processed to yield brake-specific mass results. The system that was employed allowed for redundant data to be collected for quality assurance and quality control. To acquire the data, the Waverider was operated at five different steady state speeds. Three modes were in the open sea off Oceanside, CA, and idle and harbor modes were also used.
总页数：	16
报告类型：	科技报告